Skip to content
noggin

Live check

Both Cores on the Mech, end to end (#29): each Core flashed over USB and over Wi-Fi, then probed over Wi-Fi with the cable in, with the cable out and after the Mech was off. Run it once the second Core is set up as the neck Core (scripts/setup.sh, answering neck), and again after a change to the Link.

just start # the noggin service, from this checkout
just live-check # asks you to plug, unplug and switch; the rest runs itself

It plugs nothing in and switches nothing itself: it asks, you do it and press Return. Each Core goes on USB alone in turn for just flash-usb (which stops the noggin service; the check starts it again) and must beacon the new program within 90 s. Then noggin/noggin flash eyes and noggin/noggin flash neck send each Core the program over Wi-Fi (plain noggin/noggin flash, as just flash runs it, is the eyes Core’s). A probe sends wink 3, which both Cores play, and reads noggin.log for each Core’s ack over Wi-Fi: with the cable in, with every cable out, and once the Mech was switched off (both Cores offline within 32 s, the beacon’s stale window plus 10 s) and on again (both back on Wi-Fi within 90 s). Each run appends its results below as a dated table, ok or FAIL per step and Core with what noggin status and the log said; commit them in a PR.

byYellow PineYellow Pine

noggin v0.2.26-6-g09bf9b7 · 09bf9b7