Parts
The Mech grows in three Stages, each complete on the desk: the eye block on its test stand with the eyes Core (Stage 1), then on the neck over the Torso with the boards in the head and the neck Core (Stage 2), then with the jaw, the whole Mech (Stage 3). Each Stage’s page lists, from the model, the parts it adds. This page is the shopping list.
The Skeleton prints in PETG and the Skin’s Shells in PLA, held on by magnets, each Colour group in its Theme’s
filament (Themes), Cansin’s build unless you pick another Preset. Our printed parts print from
just stl (model/build/stl, mm).
Parts to buy
Section titled “Parts to buy”The one place the shop’s names and codes appear (2026-10-31, grilled; #51). Electronics are Bambu Lab’s CyberBrick range, filament is Bambu’s PLA and PETG lines the Themes name.
- Owned: Beginner Hardware Kit ZK004 (2 Cores, an X11 receiver shield + a transmitter shield, switch module, 2S pack, charger, one 180 and one 360 servo), Battery Upgrade Kit ZL003 (second switch module + second pack), 4 PG001 servos, M3x10, M2x12, M2 nuts (20 each); ordered 2026-10-31 from the Bambu EU store: X11 Receiver Shield XA004 x1, servo PG001 x3, battery PC003 x1.
- The Mech uses: 2 Cores, 2 Shields, 1 switch board, 1 pack with a Y lead to both Shields, 7 PG001 servos (4 on the eyes Core, 3 on the neck Core); the kit’s spare M3 screws as the busy pivots’ shanks; the next Mech also holds the spare pack on the kit’s charger dongle in its Torso (#858). Spare: a switch board. The 360 servo turns continuously, so it is not used.
- To buy: the magnets, 4x2 mm N52 discs, the one new purchase.
- Filament: each Preset’s Bambu filaments, by line, name and code (Themes, from the model; the picks: docs/research/2026-11-03-bambu-theme-colours.md): PETG Basic and Matte for the Skeleton, the model taking PETG HF’s figures as the worst case, PLA Basic and Matte for the Morty and Bart Skins. Owned: PLA Pure in Milky Pink, Pure White, Absolute Black and Apricot (docs/research/2026-10-31-filament.md), the cansin Skin’s four, and black PETG, which prints Cansin’s build’s whole Skeleton.
The filaments of the Preset picked in the header, with the Colour groups each prints:
- Cansin's build: Bones, Joints, Linkages, Mounts PETG Basic Black (30105); face PLA Pure Milky Pink (17200); hair, pupils PLA Pure Absolute Black (17101); clothes, eye whites PLA Pure Pure White (17100); accessories PLA Pure Apricot (17300)
- Morty: Bones PETG Basic Dark Beige (30403); Joints PETG Matte White (35100); Linkages PETG Matte Pink (35700); Mounts PETG Basic Black (30105); face PLA Basic Beige (10201); hair, pupils, accessories PLA Basic Cocoa Brown (10802); clothes PLA Matte Lemon Yellow (11400); eye whites PLA Basic Jade White (10100)
- Bart: Bones PETG Basic Dark Beige (30403); Joints PETG Matte White (35100); Linkages PETG Matte Pink (35700); Mounts PETG Basic Black (30105); face, hair PLA Basic Sunflower Yellow (10402); pupils, accessories PLA Matte Charcoal (11101); clothes PLA Matte Scarlet Red (11200); eye whites PLA Matte Ivory White (11100)
On the Mac
Section titled “On the Mac”macOS, uv (Python 3.14 and mpremote come with it) and Claude Code. uv manages
.venv and runs mpremote and pytest; the system Python is 3.9 and is not used.
noggin v0.2.26-6-g09bf9b7 · 09bf9b7