Skip to content
noggin

Patents on figure heads: eyes, lids, jaw, neck, swappable shells

Researched 2026-11-02. Purpose: techniques the next Mech (#51) can learn from, and any live patent its design might read on. Not legal advice: “reads on” below is a plain claim-by-claim comparison, marked [I].

Read from the patent’s own text: Google Patents pages (claims, description, legal events) or the USPTO grant PDF (image-ppubs.uspto.gov). Status is Google’s legal-status line unless marked “by term” (20 years from filing, worked out from the grant’s front page because Google was rate-limiting).

Sources:

  • Hanson’s eye frame [HAN]. Each eye pivots on its own vertical axis. Rigid struts tie those pivots to one “eye frame” that keeps the axes parallel, so one actuator turns both eyes left/right. The whole frame then tilts on a hinge whose horizontal axis passes through both eye centres, so the eyes turn like balls in their sockets. Expired. This is #51’s linked gimbal almost exactly: one servo for left/right, one for up/down.
  • Wangrui’s eye system [WR]. A horizontal movement frame carries both eyeballs and turns them together. A vertical movement block holds that frame with upper and lower arms. The sockets in a front panel fix each eye’s centre. Both upper lids hinge on one axis on the front panel; one motor drives them, and the lower lids are fixed. Expired. The same layout as [HAN], with the lids mounted on the face plate rather than on the gimbal.
  • Two axes through the eye centre [FB]. Each eyeball turns on two axes that cross at a fixed centre point, with encoder bars to measure the angle. Expired.
  • Disney’s eyes [DEM, DEF, DLCD] put an electromagnetic drive and a gimbal hub inside a floating eyeball, or show a screen under a lens. Live, but every independent claim needs the electromagnetic drive, a fluid suspension or a display. A servo-driven gimbal reads on none of them [I].
  • Lids on the eye’s own axis [FUR]. Furby’s two eyelids are “one-third spherical” shells joined by a bearing ring. They sit on the same pivot shaft as the eyes, so each lid stays concentric with its eyeball. Expired. [I] On #51 this means the lid arms pivot on the gimbal’s up/down axis. The lid then clears the eyeball cap by the same gap at every gaze angle, and lids that follow gaze are just software: lid angle = lid level + eye up/down angle.
  • Lids on the face plate [WR] hinge on a fixed axis, so a lid does not follow the eye up or down. Expired.
  • Magnet-coupled lid [RBX]. A drive band behind a soft face mask holds magnets that couple to the eyelid support glued inside the mask’s own eyelid. Live to 2039. Every independent claim needs an eyelid that is “a unitary component of the face mask” plus an annular-sector support frame and drive band. #51’s lid covers are separate rigid PLA parts on the lid arms, so they read on none of these claims [I].
  • Lids following gaze. I found no patent with a mechanical link from eye pitch to lid; [HAN] and [BOS] drive the lids separately. [I] #51 keeps a servo per lid, so the coupling is software and needs no mechanism.
  • Spring to closed, damper against bounce [PD]. A motor winds a string that opens the lower lip. A tension spring shuts it when power drops, and a sprung friction brake on the motor shaft stops the lip bouncing past fully open. Expired by term.
  • Jaw motor in the head, pan motor in the body [GEM]. A reciprocating motor in the body turns the head side to side on an upright axle, and a separate motor in the head drives the lower mandible. A neckerchief hides the seam between head and body. Expired.
  • One motor for jaw, eyes and lids [CAL]. The jaw and eyes move whenever the motor runs. A friction coupling blinks the lids once each time the motor reverses. Expired.
  • Pan on the body, tilt carried by pan [BOS]. A main head chassis turns on a body mount (pan). A head-tilt chassis rides on it, and the lower lids hang from the tilt chassis. Live to 2037, but the claims are a method: on a failed task the robot gathers more sensor data, makes an expressive move, then retries. The noggin service mirrors Claude Code events and attempts no task of its own, so it does not read [I]. The mechanism is in the description only.
  • Clutch against a held head [HCL]. A clutch in the gear train lets the head stop when a child holds it, so the motor does not stall. Expired. The PG001’s own slip clutch does this already (docs/build/calibration.md).
  • No neck patent from Disney, Sony or Spin Master turned up in Google Patents searches by assignee with eye/eyelid/jaw/head/neck terms.
  • Cover recognised by a key [SONY]. A detachable cover carries a pattern (in claim 2, a raised-and-recessed pattern that fits only the right partner). The robot reads it and switches the model that picks its actions. Expired.
  • Cover identified electronically [EVO]. A tool-free character skin carries an ID. The toy reads it and runs that character’s program. Live to 2037. Claim 1 needs a “self-propelled”, “autonomous toy robot”. The Mech stays put, so it does not read [I].
  • Detachable face with a display [FUH]. The robot adapts its personality to the face part, using data received from that part. Live in Europe to 2037. It needs a display surface on the face part; #51’s shells have none [I].
  • Magnets on a face mask [MCM]. Magnets inside the mask couple to magnets on the support, which slide to change the face’s shape. Live to 2032. Claim 1 needs the second magnet to be “adjustable over a range of positions”. Fixed magnets do not read [I].
  • Polarity-keyed magnets [HMAG]. An accessory carries a pair of magnets of opposite polarity, and the body carries a matching opposite pair. The accessory can sit only one way round and snaps into alignment. Live by term, but every claim needs a spherical self-propelled body with wheels, so it does not read [I].
  • Furby [FUR]. One small reversible motor turns one control shaft. Cams on that shaft move the eyes, lids, mouth, ears and feet; running the motor backwards gives non-cyclic, life-like motion. An optical counter on a slotted gear replaces a potentiometer, so there is less friction and the toy survives drop tests. Expired.
  • Cal R&D [CAL]: motor reversal triggers a blink through a friction coupling. Expired.
  • [I] #51 already has one servo per feature (7 servos), so the cam tricks are only a fallback if a servo is lost. The one to keep in mind: [FUR]’s lids and eyes on one shaft.
Technique Feature From Status
Struts on a frame keep both eyes’ vertical axes parallel (one left/right servo); the frame tilts on a hinge through both eye centres (one up/down servo) eye gimbal [HAN] US7113848 expired
Sockets in a front plate fix each eye’s centre; the frame carries both eyes eye gimbal [WR] US10723017 expired
Lid pivot on the eye’s up/down axis; lid as a spherical shell concentric with the eyeball lid arms, lid covers [FUR] US6149490 expired
Lid follows gaze in software: lid angle = level + eye pitch [I] lid gestures none needed n/a
Spring biases the jaw closed; light friction stops overshoot [I: on a position servo the spring takes up gear backlash] mouth [PD] US5823847 expired
A collar or neckerchief hides the head-to-body seam over the pan joint collar/shirt shell [GEM] US6604981 expired
Opposite-polarity magnet pairs so a part seats only one way and self-aligns every magnet-held shell [HMAG] US10870064 live, but its claims need a rolling ball robot
If shells are ever auto-detected: a key pattern on the cover, read by the base shell swap [SONY] US6711469 expired
  • Identical magnets everywhere let parts fit wrongly [I]. With one disc size everywhere and every magnet the same way up, a left lid cover fits the right arm, and a symmetric shell can seat rotated. Proposed change: keep the one disc size, but give each part a polarity pattern (e.g. one magnet flipped, at a different spot for left and right) so it seats only one way ([HMAG], technique only).
  • Lid pivot axis. #51 says only “eye gimbal with … lid arms”. If the lid arms hinge on a fixed head axis (as on [WR]), gaze-following lids need a large lid travel, and the lid-to-cap gap changes as the eyes look up and down. Proposed change: pivot the lid arms coaxially with the gimbal’s up/down axis ([FUR]). Each lid keeps its own servo, so wink is unchanged.
  • Live patents to stay clear of [I]:
    • [RBX], to 2039: do not mould the lids into the head shell as one flexible part with magnet-coupled drive bands. #51’s separate lid covers are clear.
    • [EVO], to 2037: do not make the Mech self-propelled while also detecting its shell electronically to switch character software.
    • [FUH], Europe to 2037: do not put a display in a detachable face part.
    • Character selection by the noggin service’s settings reads on none of them.
  • No #51 decision is beaten on the eyes or neck: the linked gimbal, one servo per lid and pan with tilt carried on it all follow expired art ([HAN], [WR], [BOS]’s layout).

Unverified:

  • [HMAG]’s maintenance-fee status. (The second Bosch patent, US10120387, claims a navigation method only: grant PDF, claim 1.)
  • A Groove X costume patent (JP7708451B2), and the Teddy Ruxpin patent: Google Patents returned 503 during the session.
  • Sony AIBO neck, Spin Master and Disney jaw or neck patents: searches by assignee found none relevant. That is not proof that none exist.
byYellow PineYellow Pine

noggin v0.2.26-6-g09bf9b7 · 09bf9b7