Skip to content
noggin

Realistic printable human skull models with teeth (#838)

2026-11-03. The goal is a realistic skull with a separate mandible, teeth and ideally the atlas and axis, under a licence a PolyForm Noncommercial repo can adopt and modify. CC0 and CC BY are preferred. SA and NC are acceptable. ND is not.

The licences and file lists come from each host’s own record: the Printables GraphQL API (api.printables.com/graphql/, print(id)) and the Sketchfab Data API (api.sketchfab.com/v3/models/{uid}). Face counts and watertightness come from trimesh 5.2 on the downloaded files.

# Model Licence (host’s label) Parts Teeth Size Downloaded
1 Anatomically Correct Human Skull (Homo Sapiens Sapiens), 3Demon CC BY-SA cranium (cut in 2) + separate mandible yes, upper and lower 1.96 M faces, 73 MB OBJ, 13 watertight bodies yes
2 Human Skull and Neck, Lassi Kaukonen (thesidekick) CC BY photogrammetry of a teaching skeleton’s top: skull + cervical spine, likely one fused mesh yes 1.32 M faces no (Sketchfab download needs a login)
3 The Anatomy of the Human Skull, Hannah Newey none listed by the API; not downloadable on Sketchfab today CT-derived; teeth remodelled so the mandible detaches yes 1.98 M faces no
4 Human skull, anatomically correct, Peter from Belgium marked CC Public Domain, provenance doubtful (see below) skull + jaw_top (upper teeth) + jaw_lower (mandible with teeth) yes, as separate bodies 330 k faces, 16 MB STL, watertight yes
5 Human Male Skull, ruslangadzhiev CC BY unknown until downloaded yes (thumbnail) 137 k faces no (login)
neck Atlas and Axis (C1 and C2) Cervical Vertebrae, Isopropyl Alcohol CC BY-NC-SA atlas and axis as separate STLs (+ vertebral artery) n/a 0.62 M + 1.51 M faces, watertight, unitless (needs scaling) yes

The following were also seen and rejected:

The skull mesh splits into 35 watertight bodies, one per bone, and each tooth is its own body. That is the structure of an atlas of segmented bones such as BodyParts3D, not of “a scan” as the page says. It matches dantana’s 2015 Thingiverse model (CC BY-SA, built from individual bones), so its Public Domain label may be a relicensing the uploader had no right to make. This is inferred: neither page names the source. Treat it as CC BY-SA at best.

  • Not checked: MyMiniFactory, Cults3D, Thangs, MorphoSource and the Smithsonian (its Open Access API returned no human-skull 3D packages for a DEMO_KEY query). The NIH 3D search found only pathology or animal skulls.
  • Atlas and axis: no skull model ships with them. They come from the separate CC BY-NC-SA model.
byYellow PineYellow Pine

noggin v0.2.26-6-g09bf9b7 · 09bf9b7